OVH Community, your new community space.

SMART support?


flosoft
05.09.07, 12:50
Nein. Afaik kann man mit vKVM erst ab dem moment dran wenn das system bootet?

Und sledge hat recht: Es müsste erstmal funktionieren.

sledge0303
05.09.07, 07:33
Zitat Zitat von Enn
Ich lese hier nur ab und zu mit, aber ist es nicht mit diesem "neuen" KVM-Tool möglich, BIOS EInstellungen zu ändern?
Dazu müsste erstmal KVM funktionieren...

Enn
05.09.07, 06:30
Zitat Zitat von flosoft
Es wäre nett wenn jemand von OVH hier sagen könnte, ob es eine möglichkeit gibt, dass dies enabled wird?
Ich lese hier nur ab und zu mit, aber ist es nicht mit diesem "neuen" KVM-Tool möglich, BIOS EInstellungen zu ändern?

flosoft
04.09.07, 21:07
Es wäre nett wenn jemand von OVH hier sagen könnte, ob es eine möglichkeit gibt, dass dies enabled wird?

bene
04.09.07, 21:05
Hmm, dann scheint es bei den SATA Boards wirklich disabled zu sein?
Hab ich mit meiner alten IDE kiste ja glück ^^

flosoft
04.09.07, 20:56
Genau wie bei mir. Ist eigentlich sehr schade.

sledge0303
04.09.07, 20:53
Nope, siehe hier

smartctl -a /dev/sda
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

Device: ATA HDT722516DLA380 Version: V43O
Serial number: VDK71GTEF925AK
Device type: disk
Local Time is: Tue Sep 4 21:52:21 2007 CEST
Device does not support SMART

Error Counter logging not supported

[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
Device does not support Self Test logging

flosoft
04.09.07, 20:51
Es ist komisch.
Code:
root@flosoft:~# smartctl --smart=ON /dev/sda
smartctl version 5.36 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=======> INVALID ARGUMENT TO -s: ON
=======> VALID ARGUMENTS ARE: on, off <=======

Use smartctl -h to get a usage summary

root@flosoft:~# smartctl --smart=on /dev/sda
smartctl version 5.36 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

unable to fetch IEC (SMART) mode page [unsupported field in scsi command]
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
root@flosoft:~# smartctl --smart=on /dev/sda
root@flosoft:~#

bene
04.09.07, 20:48
Code:
[root@paris ~]# smartctl -a /dev/hda
smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     HDT722516DLAT80
Serial Number:    VD0D1GTE1G664K
Firmware Version: V43OA96A
User Capacity:    164,696,555,520 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 1
Local Time is:    Tue Sep  4 21:18:13 2007 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (3238) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  54) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   220   220   024    Pre-fail  Always       -       159 (Average 159)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       37
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   020    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       6706
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       37
192 Power-Off_Retract_Count 0x0032   100   100   050    Old_age   Always       -       301
193 Load_Cycle_Count        0x0012   100   100   050    Old_age   Always       -       301
194 Temperature_Celsius     0x0002   130   130   000    Old_age   Always       -       42 (Lifetime Min/Max 25/52)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Aber du scheinst ja eine SATA büchse zu haben, vielleicht ist es da anders!?

flosoft
04.09.07, 20:42
Ich krieg aber das:
root@flosoft:~# /etc/init.d/smartmontools start
Enabling S.M.A.R.T..../dev/sda...unable to fetch IEC (SMART) mode page [unsupported field in scsi command]
(failed).../dev/sdb...unable to fetch IEC (SMART) mode page [unsupported field in scsi command]
(failed)...done.
Starting S.M.A.R.T. daemon: smartd failed!
root@flosoft:~#

bene
04.09.07, 20:38
ja ist es

flosoft
04.09.07, 18:43
Hallo,

wollte mal fragen: Ist SMART für die Festplatten im BIOS aktiviert?