OVH Community, your new community space.

Speicherzugriffsfehler


sledge0303
26.10.08, 11:12
Zitat Zitat von blupp1
Was genau meinst du?
Anspielung auf eine Aussage von dir, der Segfault trat nach einer Neuinstallation des Systems ebenfalls auf.
Wenn der RAM bereits getauscht wurde, OK, aber muss bei Segfault nicht automatisch der RAM Schuld sein.

blupp1
26.10.08, 10:20
Was genau meinst du?

sledge0303
26.10.08, 09:31
Zitat Zitat von blupp1
Segemntion Fault -.-
würde ich anhand der vorherigen Ausgabe des Fehlers beobachten, auch wenn der Fehler behoben scheint...

blupp1
25.10.08, 22:58
Segemntion Fault -.-

aLca
25.10.08, 21:59
Was wars nun?

blupp1
25.10.08, 21:45
-erledigt-

blupp1
25.10.08, 21:28
Trotz Neuinstallation wurde es nicht behoben.

blupp1
25.10.08, 10:38
Hallo,

ich erhalte auf einmal, ohne etwas verändert zu haben folgenden Fehler:

Code:
ftpcopy *parameter*
Speicherzugriffsfehler
Ram wurde bereits getauscht, jedoch erhalte ich diesen Fehler immernoch.

Ein strace ftpcopy ergibt dies:

execve("/usr/bin/ftpcopy", ["ftpcopy", "--user=*user*", "--pass=*passwort*", "ftp://distro.otrinfo.de", "/sda3/keys", "-x", "*_bay3_*", "-x", "*_sw3_*", "-x", "*_mdr_*", "-x", "*_ndr_*", "-x", "*index.txt*", "-x", ...], [/* 19 vars */]) = 0
uname({sys="Linux", node="ks34394.kimsufi.com", ...}) = 0
brk(0) = 0x8062540
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f9d000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=14170, ...}) = 0
mmap2(NULL, 14170, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f99000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/tls/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\2 40O\1"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=1245488, ...}) = 0
mmap2(NULL, 1251484, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e67000
mmap2(0xb7f8f000, 28672, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x128) = 0xb7f8f000
mmap2(0xb7f96000, 10396, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f96000
close(3) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7e66000
mprotect(0xb7f8f000, 20480, PROT_READ) = 0
set_thread_area({entry_number:-1 -> 6, base_addr:0xb7e668e0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0
munmap(0xb7f99000, 14170) = 0
brk(0) = 0x8062540
brk(0x8084540) = 0x8084540
brk(0x8085000) = 0x8085000
ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0
rt_sigaction(SIGWINCH, {0x8050f80, [], 0}, NULL, 8) = 0
ioctl(2, TIOCGWINSZ, {ws_row=24, ws_col=80, ws_xpixel=0, ws_ypixel=0}) = 0
getcwd("/home/blupp1", 256) = 13
open(".", O_RDONLY|O_NONBLOCK|O_LARGEFILE) = 3
socket(PF_INET6, SOCK_STREAM, IPPROTO_IP) = -1 EAFNOSUPPORT (Address family not supported by protocol)
gettimeofday({1224923355, 210968}, NULL) = 0
open("/etc/dnsrewrite", O_RDONLY|O_NONBLOCK|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/etc/resolv.conf", O_RDONLY|O_NONBLOCK|O_LARGEFILE) = 4
read(4, "nameserver 127.0.0.1\nnameserver "..., 64) = 64
read(4, "86.33.99\n", 64) = 9
read(4, "", 64) = 0
close(4) = 0
uname({sys="Linux", node="ks34394.kimsufi.com", ...}) = 0
gettimeofday({1224923355, 212268}, NULL) = 0
open("/etc/resolv.conf", O_RDONLY|O_NONBLOCK|O_LARGEFILE) = 4
read(4, "nameserver 127.0.0.1\nnameserver "..., 64) = 64
read(4, "86.33.99\n", 64) = 9
read(4, "", 64) = 0
close(4) = 0
socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4
fcntl64(4, F_GETFL) = 0x2 (flags O_RDWR)
fcntl64(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0
bind(4, {sa_family=AF_INET, sin_port=htons(64715), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
connect(4, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("127.0.0.1")}, 16) = 0
send(4, "\356\274\1\0\0\1\0\0\0\0\0\0\6distro\7otrinfo\2de \0\0"..., 35, 0) = 35
gettimeofday({1224923355, 214046}, NULL) = 0
gettimeofday({1224923355, 214136}, NULL) = 0
poll([{fd=4, events=POLLIN, revents=POLLIN}], 1, 3019) = 1
recv(4, "\356\274\201\200\0\1\0\0\0\1\0\0\6distro\7otrinfo \2de\0"..., 513, 0) = 101
close(4) = 0
gettimeofday({1224923355, 214609}, NULL) = 0
socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4
fcntl64(4, F_GETFL) = 0x2 (flags O_RDWR)
fcntl64(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0
bind(4, {sa_family=AF_INET, sin_port=htons(59258), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
connect(4, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("127.0.0.1")}, 16) = 0
send(4, "p\35\1\0\0\1\0\0\0\0\0\0\6distro\7otrinfo\2de\0\0 "..., 35, 0) = 35
gettimeofday({1224923355, 215871}, NULL) = 0
gettimeofday({1224923355, 215919}, NULL) = 0
poll([{fd=4, events=POLLIN, revents=POLLIN}], 1, 3019) = 1
recv(4, "p\35\201\200\0\1\0\1\0\5\0\0\6distro\7otrinfo\2de \0\0"..., 513, 0) = 180
close(4) = 0
socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 4
fcntl64(4, F_GETFL) = 0x2 (flags O_RDWR)
fcntl64(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0
connect(4, {sa_family=AF_INET, sin_port=htons(21), sin_addr=inet_addr("91.121.135.147")}, 16) = -1 EINPROGRESS (Operation now in progress)
gettimeofday({1224923355, 217125}, NULL) = 0
gettimeofday({1224923355, 217214}, NULL) = 0
poll([{fd=4, events=POLLOUT, revents=POLLOUT}], 1, 30019) = 1
getpeername(4, {sa_family=AF_INET, sin_port=htons(21), sin_addr=inet_addr("91.121.135.147")}, [16]) = 0
fcntl64(4, F_GETFL) = 0x802 (flags O_RDWR|O_NONBLOCK)
fcntl64(4, F_SETFL, O_RDWR) = 0
gettimeofday({1224923355, 221503}, NULL) = 0
poll([{fd=4, events=POLLIN, revents=POLLIN}], 1, 30020) = 1
read(4, "220 ProFTPD 1.3.2rc2 Server (otr"..., 4096) = 64
gettimeofday({1224923355, 233264}, NULL) = 0
poll([{fd=4, events=POLLOUT, revents=POLLOUT}], 1, 30020) = 1
write(4, "USER *user*\r\n", 9) = 9
gettimeofday({1224923355, 233647}, NULL) = 0
poll([{fd=4, events=POLLIN, revents=POLLIN}], 1, 30020) = 1
read(4, "331 Password required for *user*\r\n", 4096) = 30
gettimeofday({1224923355, 241062}, NULL) = 0
poll([{fd=4, events=POLLOUT, revents=POLLOUT}], 1, 30020) = 1
write(4, "PASS *passwort*\r\n", 19) = 19
gettimeofday({1224923355, 241405}, NULL) = 0
poll([{fd=4, events=POLLIN, revents=POLLIN}], 1, 30020) = 1
read(4, "230 User *user* logged in\r\n", 4096) = 23
gettimeofday({1224923355, 249635}, NULL) = 0
poll([{fd=4, events=POLLOUT, revents=POLLOUT}], 1, 30020) = 1
write(4, "TYPE I\r\n", 8) = 8
gettimeofday({1224923355, 249955}, NULL) = 0
poll([{fd=4, events=POLLIN, revents=POLLIN}], 1, 30020) = 1
read(4, "200 Type set to I\r\n", 4096) = 19
gettimeofday({1224923355, 254304}, NULL) = 0
poll([{fd=4, events=POLLOUT, revents=POLLOUT}], 1, 30020) = 1
write(4, "CWD /\r\n", 7) = 7
gettimeofday({1224923355, 254638}, NULL) = 0
poll([{fd=4, events=POLLIN, revents=POLLIN}], 1, 30020) = 1
read(4, "250 CWD command successful\r\n", 4096) = 28
gettimeofday({1224923355, 258974}, NULL) = 0
poll([{fd=4, events=POLLOUT, revents=POLLOUT}], 1, 30020) = 1
write(4, "MLST /\r\n", 8) = 8
gettimeofday({1224923355, 259279}, NULL) = 0
poll([{fd=4, events=POLLIN, revents=POLLIN}], 1, 30020) = 1
read(4, "250- Start of list for /\r\n", 4096) = 26
gettimeofday({1224923355, 263543}, NULL) = 0
poll([{fd=4, events=POLLIN, revents=POLLIN}], 1, 30020) = 1
read(4, " modify=20081025073002;perm=fle;"..., 4096) = 126
--- SIGSEGV (Segmentation fault) @ 0 (0) ---
+++ killed by SIGSEGV +++
Process 24127 detached
EDIT: Werde Server einfach mal neuinstallieren.