TedRoastBeef
26.05.16, 20:27
Konnte ich bisher nicht feststellen da die schnellste und beste Möglichkeit war den Server neu zu installieren.
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 149.202.210.214
netmask 255.255.255.0
network 149.202.210.0
broadcast 149.202.210.255
gateway 149.202.210.254
iface eth0 inet6 static
address 2001:41d0:1000:14d6::
netmask 64
dns-nameservers 2001:41d0:3:163::1
post-up /sbin/ip -family inet6 route add 2001:41d0:1000:14ff:ff:ff:ff:ff dev eth0
post-up /sbin/ip -family inet6 route add default via 2001:41d0:1000:14ff:ff:ff:ff:ff
pre-down /sbin/ip -family inet6 route del default via 2001:41d0:1000:14ff:ff:ff:ff:ff
pre-down /sbin/ip -family inet6 route del 2001:41d0:1000:14ff:ff:ff:ff:ff dev eth0
auto vmbr0
iface vmbr0 inet static
address 91.134.214.28
netmask 255.255.255.252
bridge_ports eth0
bridge_stp off
bridge_fd 0
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 91.134.214.28
netmask 255.255.255.252
post-up ip route add 149.200.210.254 dev eth0
post-up ip route add default via 149.202.210.254 dev eth0
pre-down ip route del default via 149.202.210.254 dev eth0
pre-down ip route del 149.202.210.254 dev eth0