We are in the process of migrating this forum. A new space will be available soon. We are sorry for the inconvenience.

HDD defekt.


hemmerseb
25.02.14, 13:00
Hallo sToN3d,

das Störungsticket für den Festplattentausch wurde soeben erstellt. Bitte noch einmal im Ticket antworten und bestätigen, dass wir eingreifen dürfen und ein Backup vorhanden ist. Ohne Antwort findet kein Eingriff statt.

Sebastian

sToN3d
25.02.14, 09:17
Nummer: 72000

Code:
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.0-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.12
Device Model:     ST31000524AS
Serial Number:    9VPC8LXF
LU WWN Device Id: 5 000c50 02e6f13fe
Firmware Version: JC45
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Feb 25 09:10:55 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 121) The previous self-test completed having
                                        the read element of the test failed.
Total time to complete Offline
data collection:                (  600) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 167) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x103f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   102   099   006    Pre-fail  Always       -       227068637
  3 Spin_Up_Time            0x0003   100   100   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       21
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       15
  7 Seek_Error_Rate         0x000f   086   060   030    Pre-fail  Always       -       463197467
  9 Power_On_Hours          0x0032   074   074   000    Old_age   Always       -       23164
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       21
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   039   039   000    Old_age   Always       -       61
188 Command_Timeout         0x0032   100   098   000    Old_age   Always       -       8590065669
189 High_Fly_Writes         0x003a   098   098   000    Old_age   Always       -       2
190 Airflow_Temperature_Cel 0x0022   065   051   045    Old_age   Always       -       35 (Min/Max 27/48)
194 Temperature_Celsius     0x0022   035   049   000    Old_age   Always       -       35 (0 25 0 0 0)
195 Hardware_ECC_Recovered  0x001a   047   020   000    Old_age   Always       -       227068637
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       1
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       1
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       252569846831766
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       3387170988
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       3135745104

SMART Error Log Version: 1
ATA Error Count: 51 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 51 occurred at disk power-on lifetime: 23164 hours (965 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 40 ff ff ff 4f 00  38d+10:16:41.225  READ DMA EXT
  ef 02 00 00 00 00 40 00  38d+10:16:41.225  SET FEATURES [Enable write cache]
  ef aa 00 00 00 00 40 00  38d+10:16:41.224  SET FEATURES [Enable read look-ahead]
  c6 00 10 00 00 00 40 00  38d+10:16:41.224  SET MULTIPLE MODE
  ef 03 46 00 00 00 40 00  38d+10:16:41.224  SET FEATURES [Set transfer mode]

Error 50 occurred at disk power-on lifetime: 23164 hours (965 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 40 ff ff ff 4f 00  38d+10:16:11.116  READ DMA EXT
  25 00 40 ff ff ff 4f 00  38d+10:16:08.390  READ DMA EXT
  ef 02 00 00 00 00 40 00  38d+10:16:08.389  SET FEATURES [Enable write cache]
  ef aa 00 00 00 00 40 00  38d+10:16:08.389  SET FEATURES [Enable read look-ahead]
  c6 00 10 00 00 00 40 00  38d+10:16:08.388  SET MULTIPLE MODE

Error 49 occurred at disk power-on lifetime: 23164 hours (965 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 40 ff ff ff 4f 00  38d+10:16:08.390  READ DMA EXT
  ef 02 00 00 00 00 40 00  38d+10:16:08.389  SET FEATURES [Enable write cache]
  ef aa 00 00 00 00 40 00  38d+10:16:08.389  SET FEATURES [Enable read look-ahead]
  c6 00 10 00 00 00 40 00  38d+10:16:08.388  SET MULTIPLE MODE
  ef 03 46 00 00 00 40 00  38d+10:16:08.388  SET FEATURES [Set transfer mode]

Error 48 occurred at disk power-on lifetime: 23164 hours (965 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 40 ff ff ff 4f 00  38d+10:15:38.280  READ DMA EXT
  25 00 40 ff ff ff 4f 00  38d+10:15:35.517  READ DMA EXT
  2f 00 01 10 00 00 00 00  38d+10:15:35.441  READ LOG EXT
  60 00 80 ff ff ff 4f 00  38d+10:15:32.706  READ FPDMA QUEUED
  2f 00 01 10 00 00 00 00  38d+10:15:32.685  READ LOG EXT

Error 47 occurred at disk power-on lifetime: 23164 hours (965 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 40 ff ff ff 4f 00  38d+10:15:35.517  READ DMA EXT
  2f 00 01 10 00 00 00 00  38d+10:15:35.441  READ LOG EXT
  60 00 80 ff ff ff 4f 00  38d+10:15:32.706  READ FPDMA QUEUED
  2f 00 01 10 00 00 00 00  38d+10:15:32.685  READ LOG EXT
  60 00 80 ff ff ff 4f 00  38d+10:15:29.955  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       90%     23164         1125574249
# 2  Short offline       Completed: read failure       90%     23164         1125574249
# 3  Extended offline    Completed without error       00%     23093         -
# 4  Extended offline    Completed without error       00%     21300         -
# 5  Extended offline    Completed without error       00%     21010         -
# 6  Extended offline    Completed without error       00%     18853         -
# 7  Short offline       Completed without error       00%     18848         -
# 8  Short offline       Completed without error       00%     14459         -
# 9  Short offline       Completed without error       00%      2574         -
#10  Short offline       Completed without error       00%      2574         -
#11  Short offline       Completed without error       00%      1118         -
#12  Short offline       Completed without error       00%       202         -
#13  Short offline       Completed without error       00%         2         -
#14  Short offline       Completed without error       00%         1         -
#15  Short offline       Completed without error       00%         1         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.