OVH Community, your new community space.

ks204390 Platte defekt


Stefan
20.02.14, 19:16
Hi,

das Ticket wurde soeben erstellt, bitte im Ticket dein Backup bestätigen.

averell
20.02.14, 16:25
Datacenter: rbx2
Rack: 21B17
Nummer: 200152

Code:
[   20.645662] ata1.00: exception Emask 0x0 SAct 0x1f SErr 0x0 action 0x6                                                                                                                                 [73/16820]
[   20.645715] ata1.00: irq_stat 0x40000008
[   20.645761] ata1.00: failed command: READ FPDMA QUEUED
[   20.645814] ata1.00: cmd 60/40:00:00:50:bb/00:00:27:00:00/40 tag 0 ncq 32768 in
         res 41/84:40:00:00:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) 
[   20.645880] ata1.00: status: { DRDY ERR }
[   20.645925] ata1.00: error: { ICRC ABRT }
[   20.645974] ata1: hard resetting link
[   20.965611] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   21.056405] ata1.00: configured for UDMA/133
[   21.056419] ata1: EH complete
[   23.966639] ata1.00: exception Emask 0x0 SAct 0x10 SErr 0x0 action 0x6
[   23.966694] ata1.00: irq_stat 0x40000008
[   23.966741] ata1.00: failed command: READ FPDMA QUEUED
[   23.966793] ata1.00: cmd 60/40:20:00:50:bb/00:00:27:00:00/40 tag 4 ncq 32768 in
         res 41/84:40:00:00:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) 
[   23.966860] ata1.00: status: { DRDY ERR }
[   23.966905] ata1.00: error: { ICRC ABRT }
[   23.966953] ata1: hard resetting link
[   24.285728] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   24.332314] ata1.00: configured for UDMA/133
[   24.332326] ata1: EH complete
[   27.425207] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[   27.425268] ata1.00: irq_stat 0x40000008
[   27.425314] ata1.00: failed command: READ FPDMA QUEUED
[   27.425366] ata1.00: cmd 60/40:00:00:50:bb/00:00:27:00:00/40 tag 0 ncq 32768 in
         res 41/84:40:00:00:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) 
[   27.425432] ata1.00: status: { DRDY ERR }
[   27.425478] ata1.00: error: { ICRC ABRT }
[   27.425527] ata1: hard resetting link
[   27.742010] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   27.800236] ata1.00: configured for UDMA/133
[   27.800247] ata1: EH complete
[   30.625064] ata1: limiting SATA link speed to 3.0 Gbps
[   30.625069] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[   30.625121] ata1.00: irq_stat 0x40000008
[   30.625166] ata1.00: failed command: READ FPDMA QUEUED
[   30.625218] ata1.00: cmd 60/40:00:00:50:bb/00:00:27:00:00/40 tag 0 ncq 32768 in
         res 41/84:40:00:00:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) 
[   30.625310] ata1.00: status: { DRDY ERR }
[   30.625369] ata1.00: error: { ICRC ABRT }
[   30.625429] ata1: hard resetting link
[   30.941976] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[   31.013615] ata1.00: configured for UDMA/133
[   31.013632] ata1: EH complete
[   33.896167] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[   33.896234] ata1.00: irq_stat 0x40000008
[   33.896294] ata1.00: failed command: READ FPDMA QUEUED
[   33.896358] ata1.00: cmd 60/40:00:00:50:bb/00:00:27:00:00/40 tag 0 ncq 32768 in
         res 41/84:40:00:00:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) 
[   33.896450] ata1.00: status: { DRDY ERR }
[   33.896508] ata1.00: error: { ICRC ABRT }
[   33.896570] ata1: hard resetting link
[   34.214032] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[   34.231052] ata1.00: configured for UDMA/133
[   34.231063] ata1: EH complete
[   37.116942] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6
[   37.117018] ata1.00: irq_stat 0x40000008
[   37.117077] ata1.00: failed command: READ FPDMA QUEUED
[   37.117141] ata1.00: cmd 60/40:00:00:50:bb/00:00:27:00:00/40 tag 0 ncq 32768 in
         res 41/84:40:00:00:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) 
[   37.117232] ata1.00: status: { DRDY ERR }
[   37.117290] ata1.00: error: { ICRC ABRT }
[   37.117350] ata1: hard resetting link
[   37.434022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[   37.490326] ata1.00: configured for UDMA/133
[   37.490340] sd 0:0:0:0: [sda]
[   37.490342] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   37.490344] sd 0:0:0:0: [sda]
[   37.490345] Sense Key : Aborted Command [current] [descriptor]
[   37.490349] Descriptor sense data with sense descriptors (in hex):
[   37.490350]         72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[   37.490359]         00 00 00 00
[   37.490363] sd 0:0:0:0: [sda]
[   37.490365] Add. Sense: Scsi parity error
[   37.490367] sd 0:0:0:0: [sda] CDB:
[   37.490368] Read(10): 28 00 27 bb 50 00 00 00 40 00
[   37.490376] end_request: I/O error, dev sda, sector 666587136
[   37.490451] ata1: EH complete
[   40.457365] ata1.00: exception Emask 0x0 SAct 0x200 SErr 0x0 action 0x0
[   40.457434] ata1.00: irq_stat 0x40000008
[   40.457494] ata1.00: failed command: READ FPDMA QUEUED
[   40.457559] ata1.00: cmd 60/08:48:08:50:bb/00:00:27:00:00/40 tag 9 ncq 4096 in
         res 41/40:08:08:50:bb/00:00:27:00:00/00 Emask 0x409 (media error) 
[   40.457650] ata1.00: status: { DRDY ERR }
[   40.457722] ata1.00: error: { UNC }
[   40.491358] ata1.00: configured for UDMA/133
[   40.491371] sd 0:0:0:0: [sda] Unhandled sense code
[   40.491373] sd 0:0:0:0: [sda]
[   40.491375] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   40.491376] sd 0:0:0:0: [sda]
[   40.491378] Sense Key : Medium Error [current] [descriptor]
[   40.491381] Descriptor sense data with sense descriptors (in hex):
[   40.491382]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[   40.491390]         27 bb 50 08
[   40.491394] sd 0:0:0:0: [sda]
[   40.491396] Add. Sense: Unrecovered read error - auto reallocate failed
[   40.491398] sd 0:0:0:0: [sda] CDB:
[   40.491399] Read(10): 28 00 27 bb 50 08 00 00 08 00
[   40.491407] end_request: I/O error, dev sda, sector 666587144
[   40.491478] ata1: EH complete
[   43.315232] ata1.00: exception Emask 0x0 SAct 0x8 SErr 0x0 action 0x0
[   43.315301] ata1.00: irq_stat 0x40000008
[   43.315360] ata1.00: failed command: READ FPDMA QUEUED
[   43.315424] ata1.00: cmd 60/08:18:08:50:bb/00:00:27:00:00/40 tag 3 ncq 4096 in
         res 41/40:08:08:50:bb/00:00:27:00:00/00 Emask 0x409 (media error) 
[   43.315516] ata1.00: status: { DRDY ERR }
[   43.315574] ata1.00: error: { UNC }
[   43.411461] ata1.00: configured for UDMA/133
[   43.411475] sd 0:0:0:0: [sda] Unhandled sense code
[   43.411477] sd 0:0:0:0: [sda]
[   43.411478] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   43.411480] sd 0:0:0:0: [sda]
[   43.411481] Sense Key : Medium Error [current] [descriptor]
[   43.411484] Descriptor sense data with sense descriptors (in hex):
[   43.411486]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[   43.411494]         27 bb 50 08
[   43.411497] sd 0:0:0:0: [sda]
[   43.411500] Add. Sense: Unrecovered read error - auto reallocate failed
[   43.411501] sd 0:0:0:0: [sda] CDB:
[   43.411502] Read(10): 28 00 27 bb 50 08 00 00 08 00
[   43.411510] end_request: I/O error, dev sda, sector 666587144
[   43.411581] ata1: EH complete
[  108.295655] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0
[  108.295723] ata1.00: irq_stat 0x40000008
[  108.295782] ata1.00: failed command: READ FPDMA QUEUED
[  108.295847] ata1.00: cmd 60/08:08:08:50:bb/00:00:27:00:00/40 tag 1 ncq 4096 in
         res 41/40:08:08:50:bb/00:00:27:00:00/00 Emask 0x409 (media error) 
[  108.295938] ata1.00: status: { DRDY ERR }
[  108.295996] ata1.00: error: { UNC }
[  108.356521] ata1.00: configured for UDMA/133
[  108.356535] sd 0:0:0:0: [sda] Unhandled sense code
[  108.356537] sd 0:0:0:0: [sda]
[  108.356538] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  108.356540] sd 0:0:0:0: [sda]
[  108.356541] Sense Key : Medium Error [current] [descriptor]
[  108.356544] Descriptor sense data with sense descriptors (in hex):
[  108.356545]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00