OVH Community, your new community space.

HDD defekt


hemmerseb
10.02.14, 09:31
Hallo heal2000,

das Störungsticket wurde soeben erstellt. Bitte gemäß der erhaltenen E-Mail noch einmal im Ticket antworten und bestätigen, dass wir die Festplatten tauschen dürfen und ein Backup der Daten existiert. Bitte auch noch angeben, ob beide Festplatten gleichzeitig oder nacheinander getauscht werden sollen.

Sebastian

heal2000
09.02.14, 18:05
Hallo,
in meinem Server ist sdb defekt. Sda ist auch nicht mehr die beste. Bitte Austausch veranlassen.

Datacenter: rbx2
Rack: 21A07
Nummer: 224476

sdb
Code:
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     ST1000DM003-9YN162
Serial Number:    S1D1JMJ3
LU WWN Device Id: 5 000c50 04b06f1fd
Firmware Version: CC4D
User Capacity:    1.000.204.886.016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Sun Feb  9 17:42:47 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   116   095   006    Pre-fail  Always       -       100944152
  3 Spin_Up_Time            0x0003   098   096   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       73
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   081   060   030    Pre-fail  Always       -       154604628
  9 Power_On_Hours          0x0032   085   085   000    Old_age   Always       -       13225
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       68
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       288
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   063   049   045    Old_age   Always       -       37 (Min/Max 35/41)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       71
193 Load_Cycle_Count        0x0032   093   093   000    Old_age   Always       -       14125
194 Temperature_Celsius     0x0022   037   051   000    Old_age   Always       -       37 (0 19 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       32
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       32
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       103616086027978
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       270356957734344
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       145407996693007

SMART Error Log Version: 1
ATA Error Count: 288 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 288 occurred at disk power-on lifetime: 13128 hours (547 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00  43d+04:20:10.317  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00  43d+04:20:10.317  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 e0 00  43d+04:20:10.317  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00  43d+04:20:10.316  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00  43d+04:20:10.316  SET FEATURES [Set transfer mode]

Error 287 occurred at disk power-on lifetime: 13128 hours (547 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00  43d+04:20:07.425  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00  43d+04:20:07.424  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 e0 00  43d+04:20:07.424  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00  43d+04:20:07.424  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00  43d+04:20:07.424  SET FEATURES [Set transfer mode]

Error 286 occurred at disk power-on lifetime: 13128 hours (547 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00  43d+04:20:04.532  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00  43d+04:20:04.532  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 e0 00  43d+04:20:04.532  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00  43d+04:20:04.532  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00  43d+04:20:04.532  SET FEATURES [Set transfer mode]

Error 285 occurred at disk power-on lifetime: 13128 hours (547 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00  43d+04:20:01.632  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00  43d+04:20:01.632  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 e0 00  43d+04:20:01.632  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00  43d+04:20:01.631  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00  43d+04:20:01.631  SET FEATURES [Set transfer mode]

Error 284 occurred at disk power-on lifetime: 13128 hours (547 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00  43d+04:19:58.740  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00  43d+04:19:58.740  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 e0 00  43d+04:19:58.739  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00  43d+04:19:58.739  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00  43d+04:19:58.739  SET FEATURES [Set transfer mode]
sda
Code:
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     ST1000DM003-9YN162
Serial Number:    S1D1F05X
LU WWN Device Id: 5 000c50 04b06c74c
Firmware Version: CC4D
User Capacity:    1.000.204.886.016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Sun Feb  9 17:44:17 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

endor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   115   099   006    Pre-fail  Always       -       84873096
  3 Spin_Up_Time            0x0003   098   096   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       80
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   075   060   030    Pre-fail  Always       -       8670335513
  9 Power_On_Hours          0x0032   085   085   000    Old_age   Always       -       13230
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       68
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   096   096   000    Old_age   Always       -       4
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   060   046   045    Old_age   Always       -       40 (Min/Max 37/42)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       78
193 Load_Cycle_Count        0x0032   058   058   000    Old_age   Always       -       85540
194 Temperature_Celsius     0x0022   040   054   000    Old_age   Always       -       40 (0 18 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       56
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       56
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       166511587111587
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       25436863575811
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       171956978624119
Code:
Feb  5 06:25:02 ks204143 rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="2018" x-info="http://www.rsyslog.com"] rsyslogd was HUPed
Feb  5 12:40:12 ks204143 kernel: [3701843.811962] ata2.00: configured for UDMA/133
Feb  5 12:40:12 ks204143 kernel: [3701843.811976] ata2: EH complete
Feb  5 12:40:15 ks204143 kernel: [3701846.645246] ata2.00: configured for UDMA/133
Feb  5 12:40:15 ks204143 kernel: [3701846.645259] ata2: EH complete
Feb  5 12:40:18 ks204143 kernel: [3701849.486868] ata2.00: configured for UDMA/133
Feb  5 12:40:18 ks204143 kernel: [3701849.486881] ata2: EH complete
Feb  5 12:40:21 ks204143 kernel: [3701852.345100] ata2.00: configured for UDMA/133
Feb  5 12:40:21 ks204143 kernel: [3701852.345113] ata2: EH complete
Feb  5 12:40:23 ks204143 kernel: [3701855.194996] ata2.00: configured for UDMA/133
Feb  5 12:40:23 ks204143 kernel: [3701855.195009] ata2: EH complete
Feb  5 12:40:26 ks204143 kernel: [3701858.044956] ata2.00: configured for UDMA/133
Feb  5 12:40:26 ks204143 kernel: [3701858.044969] sd 1:0:0:0: [sdb] Unhandled sense code
Feb  5 12:40:26 ks204143 kernel: [3701858.044972] sd 1:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Feb  5 12:40:26 ks204143 kernel: [3701858.044976] sd 1:0:0:0: [sdb]  Sense Key : Medium Error [current] [descriptor]
Feb  5 12:40:26 ks204143 kernel: [3701858.044981] Descriptor sense data with sense descriptors (in hex):
Feb  5 12:40:26 ks204143 kernel: [3701858.044983]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
Feb  5 12:40:26 ks204143 kernel: [3701858.044993]         5e 0b c3 e0 
Feb  5 12:40:26 ks204143 kernel: [3701858.044997] sd 1:0:0:0: [sdb]  Add. Sense: Unrecovered read error - auto reallocate failed
Feb  5 12:40:26 ks204143 kernel: [3701858.045002] sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 5e 0b c3 82 00 00 80 00
Feb  5 12:40:26 ks204143 kernel: [3701858.045906] ata2: EH complete
Feb  5 12:40:29 ks204143 kernel: [3701860.911471] ata2.00: configured for UDMA/133
Feb  5 12:40:29 ks204143 kernel: [3701860.911483] ata2: EH complete
Feb  5 12:40:32 ks204143 kernel: [3701863.744761] ata2.00: configured for UDMA/133
Feb  5 12:40:32 ks204143 kernel: [3701863.744774] ata2: EH complete
Feb  5 12:40:35 ks204143 kernel: [3701866.578105] ata2.00: configured for UDMA/133
Feb  5 12:40:35 ks204143 kernel: [3701866.578125] ata2: EH complete
Feb  5 12:40:38 ks204143 kernel: [3701869.427985] ata2.00: configured for UDMA/133
Feb  5 12:40:38 ks204143 kernel: [3701869.427997] ata2: EH complete
Feb  5 12:40:40 ks204143 kernel: [3701872.269578] ata2.00: configured for UDMA/133
Feb  5 12:40:40 ks204143 kernel: [3701872.269590] ata2: EH complete
Feb  5 12:40:43 ks204143 kernel: [3701875.127811] ata2.00: configured for UDMA/133
Feb  5 12:40:43 ks204143 kernel: [3701875.127824] sd 1:0:0:0: [sdb] Unhandled sense code
Feb  5 12:40:43 ks204143 kernel: [3701875.127827] sd 1:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Feb  5 12:40:43 ks204143 kernel: [3701875.127830] sd 1:0:0:0: [sdb]  Sense Key : Medium Error [current] [descriptor]
Feb  5 12:40:43 ks204143 kernel: [3701875.127835] Descriptor sense data with sense descriptors (in hex):
Feb  5 12:40:43 ks204143 kernel: [3701875.127838]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
Feb  5 12:40:43 ks204143 kernel: [3701875.127847]         5e 0b c3 e0 
Feb  5 12:40:43 ks204143 kernel: [3701875.127851] sd 1:0:0:0: [sdb]  Add. Sense: Unrecovered read error - auto reallocate failed
Feb  5 12:40:43 ks204143 kernel: [3701875.127856] sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 5e 0b c3 e0 00 00 08 00
Feb  5 12:40:43 ks204143 kernel: [3701875.129640] ata2: EH complete
Feb  5 12:40:46 ks204143 kernel: [3701877.961187] ata2.00: configured for UDMA/133
Feb  5 12:40:46 ks204143 kernel: [3701877.961206] ata2: EH complete
Feb  5 12:40:49 ks204143 kernel: [3701880.802807] ata2.00: configured for UDMA/133
Feb  5 12:40:49 ks204143 kernel: [3701880.802819] ata2: EH complete
Feb  5 12:40:52 ks204143 kernel: [3701883.652714] ata2.00: configured for UDMA/133
Feb  5 12:40:52 ks204143 kernel: [3701883.652726] ata2: EH complete
Feb  5 12:40:55 ks204143 kernel: [3701886.510947] ata2.00: configured for UDMA/133
Feb  5 12:40:55 ks204143 kernel: [3701886.510959] ata2: EH complete
Feb  5 12:40:58 ks204143 kernel: [3701889.352561] ata2.00: configured for UDMA/133
Feb  5 12:40:58 ks204143 kernel: [3701889.352573] ata2: EH complete
Feb  5 12:41:00 ks204143 kernel: [3701892.194173] ata2.00: configured for UDMA/133
Feb  5 12:41:00 ks204143 kernel: [3701892.194186] sd 1:0:0:0: [sdb] Unhandled sense code
Feb  5 12:41:00 ks204143 kernel: [3701892.194189] sd 1:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Feb  5 12:41:00 ks204143 kernel: [3701892.194193] sd 1:0:0:0: [sdb]  Sense Key : Medium Error [current] [descriptor]
Feb  5 12:41:00 ks204143 kernel: [3701892.194198] Descriptor sense data with sense descriptors (in hex):
Feb  5 12:41:00 ks204143 kernel: [3701892.194200]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
Feb  5 12:41:00 ks204143 kernel: [3701892.194210]         5e 0b c3 e0 
Feb  5 12:41:00 ks204143 kernel: [3701892.194214] sd 1:0:0:0: [sdb]  Add. Sense: Unrecovered read error - auto reallocate failed
Feb  5 12:41:00 ks204143 kernel: [3701892.194219] sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 5e 0b c3 e0 00 00 08 00
Feb  5 12:41:00 ks204143 kernel: [3701892.197869] ata2: EH complete
Feb  5 12:41:03 ks204143 kernel: [3701895.035743] ata2.00: configured for UDMA/133
Feb  5 12:41:03 ks204143 kernel: [3701895.035755] ata2: EH complete
Feb  5 12:41:06 ks204143 kernel: [3701897.910334] ata2.00: configured for UDMA/133
Feb  5 12:41:06 ks204143 kernel: [3701897.910346] ata2: EH complete
Feb  5 12:41:09 ks204143 kernel: [3701900.743932] ata2.00: configured for UDMA/133
Feb  5 12:41:09 ks204143 kernel: [3701900.743944] ata2: EH complete
Feb  5 12:41:12 ks204143 kernel: [3701903.585510] ata2.00: configured for UDMA/133
Feb  5 12:41:12 ks204143 kernel: [3701903.585523] ata2: EH complete
Feb  5 12:41:15 ks204143 kernel: [3701906.435457] ata2.00: configured for UDMA/133
Feb  5 12:41:15 ks204143 kernel: [3701906.435470] ata2: EH complete
Feb  5 12:41:18 ks204143 kernel: [3701909.293681] ata2.00: configured for UDMA/133
Feb  5 12:41:18 ks204143 kernel: [3701909.293694] sd 1:0:0:0: [sdb] Unhandled sense code
Feb  5 12:41:18 ks204143 kernel: [3701909.293696] sd 1:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Feb  5 12:41:18 ks204143 kernel: [3701909.293700] sd 1:0:0:0: [sdb]  Sense Key : Medium Error [current] [descriptor]
Feb  5 12:41:18 ks204143 kernel: [3701909.293705] Descriptor sense data with sense descriptors (in hex):
Feb  5 12:41:18 ks204143 kernel: [3701909.293707]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
Feb  5 12:41:18 ks204143 kernel: [3701909.293717]         5e 0b c3 e0 
Feb  5 12:41:18 ks204143 kernel: [3701909.293721] sd 1:0:0:0: [sdb]  Add. Sense: Unrecovered read error - auto reallocate failed
Feb  5 12:41:18 ks204143 kernel: [3701909.293726] sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 5e 0b c3 e0 00 00 08 00
Feb  5 12:41:18 ks204143 kernel: [3701909.297310] ata2: EH complete
Feb  5 12:41:20 ks204143 kernel: [3701912.126992] ata2.00: configured for UDMA/133
Feb  5 12:41:20 ks204143 kernel: [3701912.127004] ata2: EH complete
Feb  5 12:41:23 ks204143 kernel: [3701914.968600] ata2.00: configured for UDMA/133
Feb  5 12:41:23 ks204143 kernel: [3701914.968613] ata2: EH complete
Feb  5 12:41:26 ks204143 kernel: [3701917.810187] ata2.00: configured for UDMA/133
Feb  5 12:41:26 ks204143 kernel: [3701917.810200] ata2: EH complete
Feb  5 12:41:29 ks204143 kernel: [3701920.651796] ata2.00: configured for UDMA/133
Feb  5 12:41:29 ks204143 kernel: [3701920.651808] ata2: EH complete
Feb  5 12:41:32 ks204143 kernel: [3701923.485102] ata2.00: configured for UDMA/133
Feb  5 12:41:32 ks204143 kernel: [3701923.485114] ata2: EH complete
Feb  5 12:41:35 ks204143 kernel: [3701926.326714] ata2.00: configured for UDMA/133
Feb  5 12:41:35 ks204143 kernel: [3701926.326727] sd 1:0:0:0: [sdb] Unhandled sense code
Feb  5 12:41:35 ks204143 kernel: [3701926.326730] sd 1:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Feb  5 12:41:35 ks204143 kernel: [3701926.326734] sd 1:0:0:0: [sdb]  Sense Key : Medium Error [current] [descriptor]
Feb  5 12:41:35 ks204143 kernel: [3701926.326738] Descriptor sense data with sense descriptors (in hex):
Feb  5 12:41:35 ks204143 kernel: [3701926.326741]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
Feb  5 12:41:35 ks204143 kernel: [3701926.326750]         5e 0b c3 e0 
Feb  5 12:41:35 ks204143 kernel: [3701926.326754] sd 1:0:0:0: [sdb]  Add. Sense: Unrecovered read error - auto reallocate failed
Feb  5 12:41:35 ks204143 kernel: [3701926.326759] sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 5e 0b c3 e0 00 00 08 00
Feb  5 12:41:35 ks204143 kernel: [3701926.330356] ata2: EH complete
Vielen Dank
Heal2000