Der Check im Rescue Pro ergibt keine Fehler.
Reallocated_Sector_Ct ist jetzt allerdings ~100 höher.
Code:
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 1
2 Throughput_Performance 0x0005 133 133 054 Pre-fail Offline - 103
3 Spin_Up_Time 0x0007 126 126 024 Pre-fail Always - 183 (Average 181)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 24
5 Reallocated_Sector_Ct 0x0033 091 091 005 Pre-fail Always - 324
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 118 118 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 4251
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 24
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1583
193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1583
194 Temperature_Celsius 0x0002 176 176 000 Old_age Always - 34 (Lifetime Min/Max 24/36)
196 Reallocated_Event_Count 0x0032 081 081 000 Old_age Always - 529
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
# hdparm -tT /dev/sda bleibt hängen
Code:
hdparm -tT /dev/sda
/dev/sda:
Im syslog:
Code:
Jan 31 14:53:25 ks3355826 kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 31 14:53:25 ks3355826 kernel: ata1.00: failed command: IDENTIFY DEVICE
Jan 31 14:53:25 ks3355826 kernel: ata1.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
Jan 31 14:53:25 ks3355826 kernel: res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 31 14:53:25 ks3355826 kernel: ata1.00: status: { DRDY }
Jan 31 14:53:25 ks3355826 kernel: ata1: hard resetting link
Jan 31 14:53:30 ks3355826 kernel: ata1: link is slow to respond, please be patient (ready=0)
Jan 31 14:53:33 ks3355826 kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 31 14:53:33 ks3355826 kernel: ata1.00: configured for UDMA/133
Jan 31 14:53:33 ks3355826 kernel: ata1: EH complete
Zudem wird das Dateisystem nach einer Zeit read only gemountet, nach einem hard reboot geht es dann wieder kurzzeitig, die Platte ist aus meiner Sicht ganz klar defekt.