We are in the process of migrating this forum. A new space will be available soon. We are sorry for the inconvenience.

Plarren Defekt


denis
18.01.14, 17:48
Wenn man auch zwei Wochen wartet...

Dengelbengel
18.01.14, 16:56
Vielen Dank für die Hilfe. Ist nur Schade das ich für 2 Wochen bezahlt hab ohne Leistung.

hemmerseb
18.01.14, 13:58
Hallo Dengelbengel,

ich habe soeben ein Störungsticket erstellt. Bitte gemäß der erhaltenen E-Mail noch einmal im Ticket antworten und bestätigen, dass wir die Festplatten jederzeit austauschen können und ein Backup der Daten vorhanden ist.

Sebastian

Dengelbengel
18.01.14, 07:00
Leider sind seid zwei Wochen die Platten auf ks384122.kimsufi defekt . Bitte austauschen.



smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.10.23-xxxx-std-ipv6-64-rescue] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA DT01ACA200
Serial Number: 73PSVHMKS
LU WWN Device Id: 5 000039 ff3d8ef88
Firmware Version: MX4OABB0
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Fri Jan 17 19:44:31 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.

General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (14726) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 246) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 140 140 054 Pre-fail Offline - 68
3 Spin_Up_Time 0x0007 141 141 024 Pre-fail Always - 295 (Average 242)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 11
5 Reallocated_Sector_Ct 0x0033 001 001 005 Pre-fail Always FAILING_NOW 2005
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 3268
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
192 Power-Off_Retract_Count 0x0032 097 097 000 Old_age Always - 4574
193 Load_Cycle_Count 0x0012 097 097 000 Old_age Always - 4574
194 Temperature_Celsius 0x0002 146 146 000 Old_age Always - 41 (Min/Max 25/43)
196 Reallocated_Event_Count 0x0032 001 001 000 Old_age Always - 2203
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0

SMART Error Log Version: 1
ATA Error Count: 14 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 14 occurred at disk power-on lifetime: 2947 hours (122 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 18 38 47 25 01 Error: IDNF at LBA = 0x01254738 = 19220280

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 68 00 e8 46 25 40 00 3d+20:42:25.040 WRITE FPDMA QUEUED
ef 10 02 00 00 00 a0 00 3d+20:42:25.040 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 3d+20:42:25.039 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 3d+20:42:25.037 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 3d+20:42:25.037 SET FEATURES [Set transfer mode]

Error 13 occurred at disk power-on lifetime: 2947 hours (122 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 08 48 47 25 01 Error: IDNF at LBA = 0x01254748 = 19220296

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 68 00 e8 46 25 40 00 3d+20:42:20.151 WRITE FPDMA QUEUED
ef 10 02 00 00 00 a0 00 3d+20:42:20.151 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 3d+20:42:20.151 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 3d+20:42:20.148 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 3d+20:42:20.148 SET FEATURES [Set transfer mode]

Error 12 occurred at disk power-on lifetime: 2947 hours (122 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 18 38 47 25 01 Error: IDNF at LBA = 0x01254738 = 19220280

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 68 00 e8 46 25 40 00 3d+20:42:18.102 WRITE FPDMA QUEUED
ef 10 02 00 00 00 a0 00 3d+20:42:18.102 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 3d+20:42:18.101 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 3d+20:42:18.099 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 3d+20:42:18.099 SET FEATURES [Set transfer mode]

Error 11 occurred at disk power-on lifetime: 2947 hours (122 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 18 38 47 25 01 Error: IDNF at LBA = 0x01254738 = 19220280

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 68 00 e8 46 25 40 00 3d+20:42:16.176 WRITE FPDMA QUEUED
ef 10 02 00 00 00 a0 00 3d+20:42:16.176 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 3d+20:42:16.176 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 3d+20:42:16.173 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 3d+20:42:16.173 SET FEATURES [Set transfer mode]

Error 10 occurred at disk power-on lifetime: 2947 hours (122 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 18 38 47 25 01 Error: IDNF at LBA = 0x01254738 = 19220280

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 68 00 e8 46 25 40 00 3d+20:42:14.010 WRITE FPDMA QUEUED
ef 10 02 00 00 00 a0 00 3d+20:42:14.010 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 3d+20:42:14.010 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 3d+20:42:14.007 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 3d+20:42:14.007 SET FEATURES [Set transfer mode]

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Interrupted (host reset) 90% 11 -
# 2 Short offline Completed without error 00% 4 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.