OVH Community, your new community space.

Festplatten Defekt


hemmerseb
14.11.13, 14:32
Hallo K@masutra,

das Störungsticket wurde soeben erstellt. Bitte - wie in der soeben zugeschickten E-Mail - noch einmal im Ticket antworten bzw. bestätigen, dass ein Eingriff erfolgen kann.

Die Server der Isgenug-Reihe wurden zwischenzeitlich "Value" genannt. Nach dem aktuellen Stand ist der Server aber der Isgenug-Reihe zuzuordnen.

Sebastian

K@masutra
14.11.13, 13:54
Datacenter: rbx5
Rack: 45B23
Nummer: 273623


Hallo
Es wurde letzten Monat bei mir eine Festplatte getauscht. Jetzt lief der Server bis zum 7.11 auch einwandfrei. Gestern habe ich gemerkt das das selbe Problem wieder vorhanden ist.
Server läuft zwar weiter aber es ist keinerlei eingabe mehr möglich in die Console.
Ich hab mal einen auszug aus dem Syslog:

Nov 13 22:15:40 ks3273623 smartd[4036]: Device: /dev/sdb [SAT], is SMART capable. Adding to "monitor" list.
Nov 13 22:15:40 ks3273623 smartd[4036]: Device: /dev/sdb [SAT], state read from /var/lib/smartmontools/smartd.TOSHIBA_DT01ACA050-Z2ILAG3FS.ata.state
Nov 13 22:15:40 ks3273623 smartd[4036]: Monitoring 2 ATA and 0 SCSI devices
Nov 13 22:15:41 ks3273623 smartd[4036]: Device: /dev/sda [SAT], FAILED SMART self-check. BACK UP DATA NOW!
Nov 13 22:15:41 ks3273623 smartd[4036]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 2 Throughput_Performance changed from 113 to 104
Nov 13 22:15:41 ks3273623 smartd[4036]: Device: /dev/sda [SAT], Failed SMART usage Attribute: 5 Reallocated_Sector_Ct.
Nov 13 22:15:41 ks3273623 smartd[4036]: Device: /dev/sda [SAT], offline data collection was suspended by an interrupting command from host (auton)
Nov 13 22:15:41 ks3273623 smartd[4036]: Device: /dev/sda [SAT], ATA error count increased from 28 to 35
Nov 13 22:15:41 ks3273623 smartd[4036]: Device: /dev/sdb [SAT], 8 Currently unreadable (pending) sectors
Nov 13 22:15:42 ks3273623 smartd[4036]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.TOSHIBA_DT01ACA050-X281K20FS.ata.state
Nov 13 22:15:42 ks3273623 smartd[4036]: Device: /dev/sdb [SAT], state written to /var/lib/smartmontools/smartd.TOSHIBA_DT01ACA050-Z2ILAG3FS.ata.state
Nov 13 22:15:42 ks3273623 smartd[4187]: smartd has fork()ed into background mode. New PID=4187.
Nov 13 22:15:42 ks3273623 smartd[4187]: file /var/run/smartd.pid written containing PID 4187
Nov 13 22:15:47 ks3273623 ntpdate[3783]: step time server 213.251.128.249 offset -0.594207 sec
Nov 13 22:15:47 ks3273623 kernel: grsec: time set by /usr/sbin/ntpdate[ntpdate:3783] uid/euid:0/0 gid/egid:0/0, parent /etc/network/if-up.d/ntpdate[ntpdate:3781] uid/euid:0/0 gid/egid:0/0
Nov 13 22:15:49 ks3273623 ntpdate[3734]: no server suitable for synchronization found
Nov 13 22:15:49 ks3273623 ntpdate[3820]: no server suitable for synchronization found
Nov 13 22:16:01 ks3273623 /USR/SBIN/CRON[4603]: (root) CMD (/usr/local/rtm/bin/rtm 44 > /dev/null 2> /dev/null)
Nov 13 22:17:01 ks3273623 /USR/SBIN/CRON[4706]: (root) CMD (/usr/local/rtm/bin/rtm 44 > /dev/null 2> /dev/null)
Nov 13 22:17:01 ks3273623 /USR/SBIN/CRON[4707]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Nov 13 22:18:01 ks3273623 /USR/SBIN/CRON[4806]: (root) CMD (/usr/local/rtm/bin/rtm 44 > /dev/null 2> /dev/null)
Nov 13 22:19:01 ks3273623 /USR/SBIN/CRON[4893]: (root) CMD (/usr/local/rtm/bin/rtm 44 > /dev/null 2> /dev/null)
Nov 13 22:20:01 ks3273623 /USR/SBIN/CRON[4981]: (root) CMD (/usr/local/rtm/bin/rtm 44 > /dev/null 2> /dev/null)
Nov 13 22:21:01 ks3273623 /USR/SBIN/CRON[5079]: (root) CMD (/usr/local/rtm/bin/rtm 44 > /dev/null 2> /dev/null)
Nov 13 22:22:01 ks3273623 /USR/SBIN/CRON[5168]: (root) CMD (/usr/local/rtm/bin/rtm 44 > /dev/null 2> /dev/null)
Nov 13 22:23:01 ks3273623 /USR/SBIN/CRON[5261]: (root) CMD (/usr/local/rtm/bin/rtm 44 > /dev/null 2> /dev/null)
Nov 13 22:23:34 ks3273623 kernel: ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
Nov 13 22:23:34 ks3273623 kernel: ata1.00: irq_stat 0x40000008
Nov 13 22:23:34 ks3273623 kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 13 22:23:34 ks3273623 kernel: ata1.00: cmd 61/30:00:98:34:04/00:00:01:00:00/40 tag 0 ncq 24576 out
Nov 13 22:23:34 ks3273623 kernel: res 51/10:30:98:34:04/00:00:01:00:00/40 Emask 0x481 (invalid argument)
Nov 13 22:23:34 ks3273623 kernel: ata1.00: status: { DRDY ERR }
Nov 13 22:23:34 ks3273623 kernel: ata1.00: error: { IDNF }
Nov 13 22:23:34 ks3273623 kernel: ata1.00: configured for UDMA/133
Nov 13 22:23:34 ks3273623 kernel: ata1: EH complete
Nov 13 22:24:01 ks3273623 /USR/SBIN/CRON[6567]: (root) CMD (/usr/local/rtm/bin/rtm 44 > /dev/null 2> /dev/null)
Nov 13 22:25:01 ks3273623 /USR/SBIN/CRON[6655]: (root) CMD (/usr/local/rtm/bin/rtm 44 > /dev/null 2> /dev/null)
Nov 13 22:26:01 ks3273623 /USR/SBIN/CRON[6743]: (root) CMD (/usr/local/rtm/bin/rtm 44 > /dev/null 2> /dev/null)
Nov 13 22:27:01 ks3273623 /USR/SBIN/CRON[6832]: (root) CMD (/usr/local/rtm/bin/rtm 44 > /dev/null 2> /dev/null)
Nov 13 22:27:25 ks3273623 kernel: ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
Nov 13 22:27:25 ks3273623 kernel: ata1.00: irq_stat 0x40000008
Nov 13 22:27:25 ks3273623 kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 13 22:27:25 ks3273623 kernel: ata1.00: cmd 61/40:00:00:3f:04/00:00:01:00:00/40 tag 0 ncq 32768 out
Nov 13 22:27:25 ks3273623 kernel: res 51/10:30:10:3f:04/00:00:01:00:00/40 Emask 0x481 (invalid argument)
Nov 13 22:27:25 ks3273623 kernel: ata1.00: status: { DRDY ERR }
Nov 13 22:27:25 ks3273623 kernel: ata1.00: error: { IDNF }
Nov 13 22:27:25 ks3273623 kernel: ata1.00: configured for UDMA/133
Nov 13 22:27:25 ks3273623 kernel: ata1: EH complete
Nov 13 22:27:37 ks3273623 kernel: ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
Nov 13 22:27:37 ks3273623 kernel: ata1.00: irq_stat 0x40000008
Nov 13 22:27:37 ks3273623 kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 13 22:27:37 ks3273623 kernel: ata1.00: cmd 61/40:00:00:3f:04/00:00:01:00:00/40 tag 0 ncq 32768 out
Nov 13 22:27:37 ks3273623 kernel: res 51/10:10:30:3f:04/00:00:01:00:00/40 Emask 0x481 (invalid argument)
Nov 13 22:27:37 ks3273623 kernel: ata1.00: status: { DRDY ERR }
Nov 13 22:27:37 ks3273623 kernel: ata1.00: error: { IDNF }
Nov 13 22:27:37 ks3273623 kernel: ata1.00: configured for UDMA/133
Nov 13 22:27:37 ks3273623 kernel: ata1: EH complete
Nov 13 22:27:44 ks3273623 kernel: ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
Nov 13 22:27:44 ks3273623 kernel: ata1.00: irq_stat 0x40000008
Nov 13 22:27:44 ks3273623 kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 13 22:27:44 ks3273623 kernel: ata1.00: cmd 61/40:00:00:3f:04/00:00:01:00:00/40 tag 0 ncq 32768 out
Nov 13 22:27:44 ks3273623 kernel: res 51/10:18:28:3f:04/00:00:01:00:00/40 Emask 0x481 (invalid argument)
Nov 13 22:27:44 ks3273623 kernel: ata1.00: status: { DRDY ERR }
Nov 13 22:27:44 ks3273623 kernel: ata1.00: error: { IDNF }
Nov 13 22:27:44 ks3273623 kernel: ata1.00: configured for UDMA/133
Nov 13 22:27:44 ks3273623 kernel: ata1: EH complete

Danach keinen zugriff mehr auf die Festplatte.
Ich hab das log auch mal nem Kumpel gezeigt. Der meint das Beide Platten kaputt sind.
Reboot nur noch möglich über OVH Manager.
Ich wusste auch gar nicht das ich einen issgenug Server habe.
Als ich ihn gemieted habe wars auf jeden fall keiner.

platte a
Code:
=== START OF INFORMATION SECTION ===
Device Model:     TOSHIBA DT01ACA050
Serial Number:    X281K20FS
LU WWN Device Id: 5 000039 ff2c0b46e
Firmware Version: MS1OA750
User Capacity:    500.107.862.016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Thu Nov 14 14:51:42 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                ( 4934) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  83) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   094   094   016    Pre-fail  Always       -       589837
  2 Throughput_Performance  0x0005   104   104   054    Pre-fail  Offline      -       210
  3 Spin_Up_Time            0x0007   104   104   024    Pre-fail  Always       -       217 (Average 224)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       12
  5 Reallocated_Sector_Ct   0x0033   001   001   005    Pre-fail  Always   FAILING_NOW 1881
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   103   103   020    Pre-fail  Offline      -       39
  9 Power_On_Hours          0x0012   099   099   000    Old_age   Always       -       8299
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       12
192 Power-Off_Retract_Count 0x0032   093   093   000    Old_age   Always       -       9414
193 Load_Cycle_Count        0x0012   093   093   000    Old_age   Always       -       9414
194 Temperature_Celsius     0x0002   253   253   000    Old_age   Always       -       23 (Min/Max 12/39)
196 Reallocated_Event_Count 0x0032   001   001   000    Old_age   Always       -       2586
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 45 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 45 occurred at disk power-on lifetime: 8283 hours (345 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 38 70 3f 04 01  Error: IDNF at LBA = 0x01043f70 = 17055600

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 60 00 48 3f 04 40 00      06:19:07.214  WRITE FPDMA QUEUED
  ef 10 02 00 00 00 a0 00      06:19:07.214  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 e0 00      06:19:07.214  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      06:19:07.211  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      06:19:07.211  SET FEATURES [Set transfer mode]

Error 44 occurred at disk power-on lifetime: 8283 hours (345 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 58 50 3f 04 01  Error: IDNF at LBA = 0x01043f50 = 17055568

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 60 00 48 3f 04 40 00      06:19:02.831  WRITE FPDMA QUEUED
  ef 10 02 00 00 00 a0 00      06:19:02.831  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 e0 00      06:19:02.831  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      06:19:02.829  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      06:19:02.828  SET FEATURES [Set transfer mode]

Error 43 occurred at disk power-on lifetime: 8283 hours (345 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 48 60 3f 04 01  Error: IDNF at LBA = 0x01043f60 = 17055584

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 60 00 48 3f 04 40 00      06:18:59.798  WRITE FPDMA QUEUED
  ef 10 02 00 00 00 a0 00      06:18:59.797  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 e0 00      06:18:59.797  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      06:18:59.795  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      06:18:59.795  SET FEATURES [Set transfer mode]

Error 42 occurred at disk power-on lifetime: 8283 hours (345 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 48 60 3f 04 01  Error: IDNF at LBA = 0x01043f60 = 17055584

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 60 00 48 3f 04 40 00      06:18:53.212  WRITE FPDMA QUEUED
  ef 10 02 00 00 00 a0 00      06:18:53.212  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 e0 00      06:18:53.212  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      06:18:53.209  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      06:18:53.209  SET FEATURES [Set transfer mode]

Error 41 occurred at disk power-on lifetime: 8283 hours (345 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 38 70 3f 04 01  Error: IDNF at LBA = 0x01043f70 = 17055600

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 60 08 48 3f 04 40 00      06:18:41.933  WRITE FPDMA QUEUED
  61 08 00 10 30 c4 40 00      06:18:41.933  WRITE FPDMA QUEUED
  ef 10 02 00 00 00 a0 00      06:18:41.932  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 e0 00      06:18:41.932  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      06:18:41.930  IDENTIFY DEVICE

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%       789         -
# 2  Short offline       Completed without error       00%       784         -
# 3  Short offline       Completed without error       00%       784         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Code:
root@ks3273623:~# smartctl -a /dev/sdb
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.10.9-xxxx-grs-ipv6-64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     TOSHIBA DT01ACA050
Serial Number:    Z2ILAG3FS
LU WWN Device Id: 5 000039 ff2d66d6e
Firmware Version: MS1OA750
User Capacity:    500.107.862.016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Thu Nov 14 14:53:10 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                ( 4800) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  80) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   132   132   054    Pre-fail  Offline      -       105
  3 Spin_Up_Time            0x0007   100   100   024    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       4
  5 Reallocated_Sector_Ct   0x0033   039   039   005    Pre-fail  Always       -       1138
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   110   110   020    Pre-fail  Offline      -       36
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       206
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       4
192 Power-Off_Retract_Count 0x0032   095   095   000    Old_age   Always       -       6532
193 Load_Cycle_Count        0x0012   095   095   000    Old_age   Always       -       6532
194 Temperature_Celsius     0x0002   250   250   000    Old_age   Always       -       24 (Min/Max 22/32)
196 Reallocated_Event_Count 0x0032   015   015   000    Old_age   Always       -       1722
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       8
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged