marion
26.09.13, 18:02
Danke. Habe auf Ticket geantwortet.
Datacenter: rbx4 Rack: 53A02 Nummer: 356173
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: TOSHIBA DT01ACA100 Serial Number: 73K08GJNS LU WWN Device Id: 5 000039 ff6ea664d Firmware Version: MS2OA750 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Tue Sep 24 18:05:23 2013 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 7410) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 124) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 082 082 016 Pre-fail Always - 1180175 2 Throughput_Performance 0x0005 138 138 054 Pre-fail Offline - 83 3 Spin_Up_Time 0x0007 127 127 024 Pre-fail Always - 182 (Average 180) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 12 5 Reallocated_Sector_Ct 0x0033 046 046 005 Pre-fail Always - 737 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 118 118 020 Pre-fail Offline - 33 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 1161 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 12 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 18 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 18 194 Temperature_Celsius 0x0002 171 171 000 Old_age Always - 35 (Min/Max 24/40) 196 Reallocated_Event_Count 0x0032 001 001 000 Old_age Always - 2086 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 16 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 90% 1160 - # 2 Extended offline Interrupted (host reset) 80% 1149 - # 3 Short offline Aborted by host 90% 964 - # 4 Short offline Completed without error 00% 964 - # 5 Short offline Completed without error 00% 16 - # 6 Short offline Completed without error 00% 14 - # 7 Short offline Completed without error 00% 14 - # 8 Short offline Completed without error 00% 11 - # 9 Short offline Completed without error 00% 6 - #10 Short offline Completed without error 00% 6 - #11 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay
1 Raw_Read_Error_Rate 0x000b 082 082 016 Pre-fail Always - 1180175
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 90% 1160 - # 2 Extended offline Interrupted (host reset) 80% 1149 - # 3 Short offline Aborted by host 90% 964 -
Sep 24 19:01:38 srv16 kernel: [1333092.799330] ata1: hard resetting link Sep 24 19:01:43 srv16 kernel: [1333098.159175] ata1: link is slow to respond, please be patient (ready=0) Sep 24 19:01:47 srv16 kernel: [1333102.079095] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Sep 24 19:01:47 srv16 kernel: [1333102.080651] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) Sep 24 19:01:47 srv16 kernel: [1333102.080661] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88040f0a1768), AE_NOT_FOUND (20110623/psparse-536) Sep 24 19:01:47 srv16 kernel: [1333102.082549] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) Sep 24 19:01:47 srv16 kernel: [1333102.082559] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88040f0a1768), AE_NOT_FOUND (20110623/psparse-536) Sep 24 19:01:47 srv16 kernel: [1333102.082835] ata1.00: configured for UDMA/33 Sep 24 19:01:47 srv16 kernel: [1333102.082840] ata1.00: retrying FLUSH 0xea Emask 0x4 Sep 24 19:01:47 srv16 kernel: [1333102.082917] ata1: EH complete
SMART Error Log Version: 1 No Errors Logged